Ford 2004 Taurus v.3 Manuel d'utilisateur télécharger pdf (Page 212)

Allow the vehicle to sit for at least eight hours without starting the

engine. Then, start the engine and complete the above driving cycle. The

engine must warm up to its normal operating temperature. Once started,

do not turn off the engine until the above driving cycle is complete.

CHECKING AND ADDING POWER STEERING FLUID

• 3.0L Vulcan engine

• 3.0L Duratec engine

Check the power steering fluid. Refer to the scheduled maintenance

guide for the service interval schedules. If adding fluid is necessary, use

only MERCON威 ATF.

1. Start the engine and let it run until it reaches normal operating

temperature (the engine coolant temperature gauge indicator will be

near the center of the normal area between H and C).

2. While the engine idles, turn the steering wheel left and right several

times.

3. Turn the engine off.

2004 Taurus (tau)

Owners Guide (post-2002-fmt)

USA English (fus)

Maintenance and Specifications

212

1 2 ... 207 208 209 210 211 212 213 214 215 216 217 ... 247 248

Pas de commentaire

Ford 2004 Taurus v.3 Manuel d'utilisateur Page 212