Ford 2004 Taurus v.3 Manuel d'utilisateur télécharger pdf (Page 40)

5. Carefully pull bulb straight out of

the socket and push in the new

bulb.

6. Install the bulb socket into the

lamp assembly by rotating it

clockwise.

7. Carefully position the headlamp

assembly onto the vehicle.

8. Hold the headlamp assembly snugly against the vehicle and install the

retainer pins straight down to lock the lamp into place.

9. Before reinstalling the bolt, make sure the retainer pins are fully

seated, and install bolt on headlamp housing.

10. Turn the headlamps on and make sure they work properly. If the

headlamp was correctly aligned before you changed the bulb, you should

not need to align it again.

Replacing high-mount brakelamp assembly — Sedan only

To change the high-mount brake

lamp assembly:

1. Pry the light assembly away from

its housing and push rearward to

disengage it from the retaining clips.

2. Lift the front of the light

assembly from the parcel shelf.

3. Disconnect the light assembly

wiring and replace the light

assembly.

2004 Taurus (tau)

Owners Guide (post-2002-fmt)

USA English (fus)

Lights

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 247 248

Pas de commentaire

Ford 2004 Taurus v.3 Manuel d'utilisateur Page 40