Ford 2004 Mustang v.3 Manuel d'utilisateur télécharger pdf (Page 61)

How to reprogram your remote entry

transmitters

You must have all remote entry transmitters

(maximum of four) available before beginning this

procedure.

To reprogram the

remote entry

transmitters:

1. Ensure the vehicle is

electronically unlocked.

2. Put the key in the

ignition.

3. Turn the key from the 2 (LOCK) position to 3

(OFF).

4. Cycle eight times rapidly (within 10 seconds)

between the 3 (OFF) position and 4 (ON). Note:

The eighth turn must end in the 4 (ON) position.

5. The doors will lock, then unlock, to confirm that

the programming mode has been activated.

6. Within 20 seconds press any button on the remote

entry transmitter. Note: If more than 20 seconds

have passed you will need to start the procedure

over again.

7. The doors will lock, then unlock, to confirm that

this remote entry transmitter has been programmed.

8. Repeat Step 6 to program each additional remote

entry transmitter.

9. Turn the ignition to the 3 (OFF) position after

you have finished programming all of the remote

entry transmitters. Note: After 20 seconds, you will

automatically exit the programming mode.

10. The doors will lock, then unlock, to confirm that

the programming mode has been exited.

Illuminated entry

The interior lamps illuminate when the remote entry

system is used to unlock the door(s) or sound the

personal alarm.

2004 04- Mustang (mus)

Owners Guide (post-2002-fmt)

USA English (fus)

Locks and Security

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 239 240

Pas de commentaire

Ford 2004 Mustang v.3 Manuel d'utilisateur Page 61