Ford 2004 Mustang v.3 Manuel d'utilisateur télécharger pdf (Page 60)

To replace the battery:

1. Twist a thin coin

between the two halves

of the remote entry

transmitter near the

key ring. DO NOT

TAKE THE RUBBER

COVER AND CIRCUIT

BOARD OFF THE FRONT HOUSING OF THE

REMOTE ENTRY TRANSMITTER.

2. Do not wipe off any

grease on the battery

terminals on the back

surface of the circuit

board.

3. Remove the old battery. Note: Please refer to

local regulations when disposing of transmitter

batteries.

4. Insert the new battery. Refer to the diagram

inside the remote entry transmitter for the correct

orientation of the battery. Press the battery down to

ensure that the battery is fully seated in the battery

housing cavity.

5. Snap the two halves back together.

Note: Replacement of the battery will not cause the

remote transmitter to become deprogrammed from

your vehicle. The remote transmitter should operate

normally after battery replacement.

Replacing lost remote entry transmitters

If you would like to have your remote entry

transmitter reprogrammed because you lost one, or

would like to buy additional remote entry

transmitters, you can either reprogram them

yourself, or take all remote entry transmitters to

your authorized dealer for reprogramming.

2004 04- Mustang (mus)

Owners Guide (post-2002-fmt)

USA English (fus)

Locks and Security

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 239 240

Pas de commentaire

Ford 2004 Mustang v.3 Manuel d'utilisateur Page 60