Ford 2004 Escape v.2 Manuel d'utilisateur télécharger pdf (Page 37)

2. Measure the height from the center of your headlamp to the ground

and mark a 2.4 meter (8 foot) horizontal reference line on the vertical

wall or screen at this height (a piece of masking tape works well). The

center of the lamp is marked by a 3.0 mm circle on the headlamp lens.

3. Turn on the low beam headlamps to illuminate the wall or screen and

open the hood. Cover the left-hand headlamp with an opaque cloth.

4. On the wall or screen you will

observe a light pattern with a

distinct horizontal edge of high

intensity light towards the right. If

this edge is not at the horizontal

reference line, the beam will need to

be adjusted.

5. Locate the vertical adjuster on

the headlamp, then use a 4mm

socket to turn the adjuster either

counterclockwise (to adjust down)

or clockwise (to adjust up) aligning

the upper edge of the light pattern

to the horizontal line.

6. Move the opaque cloth to cover

the right-hand headlamp and repeat

steps 4 and 5 for the left-hand

headlamp.

7. HORIZONTAL AIM IS NOT REQUIRED FOR THIS VEHICLE AND IS

NON-ADJUSTABLE.

8. Close the hood and turn off the lamps.

2004 Escape (204)

Owners Guide (post-2002-fmt)

USA English (fus)

Lights

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 255 256

Pas de commentaire

Ford 2004 Escape v.2 Manuel d'utilisateur Page 37