Ford 2002 Explorer v.2 Manuel d'utilisateur télécharger pdf (Page 286)

100

101

JOBNAME: T14191ExplOG-US PAGE: 286 SESS: 12 OUTPUT: Tue Aug 26 14:27:29 2014

/restores/ford/ownguide/14191e-exp/og

Replacing tail/brake/turn/backup lamp bulbs

The tail/brake//turn/backup bulbs are located in the tail lamp assembly,

one just below the other. Follow the same steps to replace either bulb:

1. Open the liftgate to expose the

lamp assembly screws.

2. Remove the two screws from the

lamp assembly.

3. Pull the lamp assembly towards

the rear and side of the vehicle at

an angle carefully removing it from

the vehicle.

4. Rotate the bulb socket

counterclockwise and remove from

lamp assembly.

5. Pull the bulb straight out of the socket and push in the new bulb.

6. To complete installation, follow the removal procedure in reverse

order.

Replacing foglamp bulbs

1. Reach under the front bumper

and remove the bulb socket from

the foglamp by turning

counterclockwise.

2. Disconnect the electrical

connector from the foglamp bulb.

3. Connect the electrical connector

to the new foglamp bulb.

4. Install the bulb socket in the foglamp turning clockwise.

Maintenance and care

286

1 2 ... 281 282 283 284 285 286 287 288 289 290 291 ... 327 328

Commentaires sur ces manuels

Pas de commentaire

Ford 2002 Explorer v.2 Manuel d'utilisateur Page 286

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2002 Explorer v.2