Ford 2002 Explorer v.2 Manuel d'utilisateur télécharger pdf (Page 284)

100

101

JOBNAME: T14191ExplOG-US PAGE: 284 SESS: 12 OUTPUT: Tue Aug 26 14:27:29 2014

/restores/ford/ownguide/14191e-exp/og

Replacing headlamp bulbs

The high beam and low beam bulbs are located in the headlamp

assembly. Follow the same steps to replace either bulb:

To remove the headlamp bulb:

1. Make sure headlamp switch is in

OFF position, then open the hood.

2. At the back of the headlamp, pry

up the two retainer pins until they

stop to release the headlamp

assembly from the vehicle and pull

headlamp forward.

3. Disconnect the electrical

connector from the bulb by pushing

the center tab and pulling

downward.

4. Remove the old bulb from the

lamp assembly by turning to unlock

and pulling it straight out of the

lamp assembly.

To install the new bulb:

Handle a halogen headlamp bulb carefully and keep out of

children’s reach. Grasp the bulb only by its plastic base and do

not touch the glass. The oil from your hand could cause the bulb to

break the next time the headlamps are operated.

Maintenance and care

284

1 2 ... 279 280 281 282 283 284 285 286 287 288 289 ... 327 328

Commentaires sur ces manuels

Pas de commentaire

Ford 2002 Explorer v.2 Manuel d'utilisateur Page 284

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2002 Explorer v.2