Ford 2002 Explorer v.1 Manuel d'utilisateur télécharger pdf (Page 273)

1. Open the liftgate to expose the

lamp assembly screws.

2. Remove the two screws from the

lamp assembly.

3. Pull the lamp assembly towards

the rear and side of the vehicle at

an angle carefully removing it from

the vehicle.

4. Rotate the bulb socket

counterclockwise and remove from

lamp assembly.

5. Pull the bulb straight out of the socket and push in the new bulb.

6. To complete installation, follow the removal procedure in reverse

order.

Replacing foglamp bulbs

1. Reach under the front bumper

and remove the bulb socket from

the foglamp by turning

counterclockwise.

2. Disconnect the electrical

connector from the foglamp bulb.

3. Connect the electrical connector

to the new foglamp bulb.

4. Install the bulb socket in the foglamp turning clockwise.

Replacing license plate lamp bulbs

1. Remove two screws and the

license plate lamp assembly from

the liftgate.

2. Rotate bulb socket

counterclockwise and remove from

lamp assembly.

3. Carefully pull the bulb from the

socket and push in the new bulb.

4. Install the lamp assembly on

liftgate with two screws.

Maintenance and care

273

1 2 ... 268 269 270 271 272 273 274 275 276 277 278 ... 311 312

Pas de commentaire

Ford 2002 Explorer v.1 Manuel d'utilisateur Page 273