Ford 2002 Explorer v.1 Manuel d'utilisateur télécharger pdf (Page 247)

Continued operation will increase the engine temperature:

• the engine will completely shut down.

• steering and braking effort will increase.

Once the engine temperature cools, the engine can be re-started. Take

your vehicle to a service facility as soon as possible to minimize engine

damage.

When fail-safe mode is activated

You have limited engine power when in the fail-safe mode, so drive the

vehicle with caution. The vehicle will not be able to maintain high speed

operation and the engine will run rough. Remember that the engine is

capable of completely shutting down automatically to prevent engine

damage, therefore:

1. Pull off the road as soon as safely possible and turn off the engine.

2. Arrange for the vehicle to be taken to a service facility.

3. If this is not possible, wait a short period for the engine to cool.

4. Check the coolant level and replenish if low.

Never remove the coolant reservoir cap while the engine is

running or hot.

5. Re start the engine and take your vehicle to a service facility.

Driving the vehicle without repairing the engine problem

increases the chance of engine damage. Take your vehicle to a

service facility as soon as possible.

CHECKING AND ADDING POWER STEERING FLUID

Check the power steering fluid. Refer to the scheduled maintenance

guide for the service interval schedules. If adding fluid is necessary, use

only MERCONt ATF.

Maintenance and care

247

1 2 ... 242 243 244 245 246 247 248 249 250 251 252 ... 311 312

Pas de commentaire

Ford 2002 Explorer v.1 Manuel d'utilisateur Page 247