Ford 2002 Explorer v.1 Manuel d'utilisateur télécharger pdf (Page 223)

Do not attempt to push start your vehicle. Automatic

transmissions do not have push-start capability.

Preparing your vehicle

When the battery is disconnected or a new battery is installed, the

transmission must relearn its adaptive strategy. As a result of this, the

transmission may shift firmly. This operation is considered normal and

will not effect function or durability of the transmission. Over time, the

adaptive learning process will fully update transmission operation to its

optimum shift feel.

1. Use only a 12–volt supply to start your vehicle.

2. Do not disconnect the battery of the disabled vehicle as this could

damage the vehicle’s electrical system.

Park the booster vehicle close to the hood of the disabled vehicle

making sure the two vehicles do not touch. Set the parking brake on both

vehicles and stay clear of the engine cooling fan and other moving parts.

4. Check all battery terminals and remove any excessive corrosion before

you attach the battery cables. Ensure that vent caps are tight and level.

5. Turn the heater fan on in both vehicles to protect any electrical

surges. Turn all other accessories off.

Connecting the jumper cables

1. Connect the positive (+) booster cable to the positive (+) terminal of

the discharged battery.

Note: In the illustrations, lightning bolts are used to designate the

assisting (boosting) battery.

–

Roadside emergencies

223

1 2 ... 218 219 220 221 222 223 224 225 226 227 228 ... 311 312

Pas de commentaire

Ford 2002 Explorer v.1 Manuel d'utilisateur Page 223