Ford 2011 Transit Connect v.2 Manuel d'utilisateur télécharger pdf (Page 14)

WARNING LIGHTS AND CHIMES

Standard instrument cluster shown; metric clusters similar

Warning lights and gauges can alert you to a vehicle condition that may

become serious enough to cause expensive repairs. A warning light may

illuminate when a problem exists with one of your vehicle’s functions.

Many lights will illuminate when you start your vehicle to make sure the

bulb works. If any light remains on after starting the vehicle, refer to the

respective system warning light for additional information.

Service engine soon: The service

engine soon indicator light

illuminates when the ignition is first

turned to the on position to check

the bulb and to indicate whether the vehicle is ready for

Inspection/Maintenance (I/M) testing. Normally, the “service engine soon”

light will stay on until the engine is cranked, then turn itself off if no

malfunctions are present. However, if after 15 seconds the “service

engine soon” light blinks eight times, it means that the vehicle is not

ready for I/M testing. See the Readiness for Inspection/Maintenance

(I/M) testing in the Maintenance and Specifications chapter.

Solid illumination after the engine is started indicates the on-board

diagnostics system (OBD-II) has detected a malfunction. Refer to

On-board diagnostics (OBD-II) in the Maintenance and Specifications

chapter. If the light is blinking, engine misfire is occurring which could

damage your catalytic converter. Drive in a moderate fashion (avoid

heavy acceleration and deceleration) and have your vehicle serviced

immediately by your authorized dealer.

Instrument Cluster

2011 Transit Connect (tst)

Owners Guide, 2nd Printing

USA (fus)

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 294 295

Pas de commentaire

Ford 2011 Transit Connect v.2 Manuel d'utilisateur Page 14