Ford 2011 Transit Connect v.2 Manuel d'utilisateur télécharger pdf (Page 253)

If an overfill occurs, excess fluid

should be removed by an authorized

dealer. If the fluid level is above the

MAX mark, fluid will have to be

removed.

An overfill condition of transmission fluid may cause shift and/or

engagement concerns and/or possible damage.

Do not use supplemental transmission fluid additives, treatments or

cleaning agents. The use of these materials may affect transmission

operation and result in damage to internal transmission components.

AIR FILTER

Refer to scheduled maintenance information for the appropriate

intervals for changing the air filter element.

When changing the air filter element, use only the air filter element

listed. Refer to Motorcraft威 part numbers in this chapter.

WARNING: To reduce the risk of vehicle damage and/or

personal burn injuries do not start your engine with the air

cleaner removed and do not remove it while the engine is running.

Changing the air filter element

1. Release the clamps that secure

the air filter housing cover.

2. Carefully separate the two halves

of the air filter housing.

3. Remove the air filter element

from the air filter housing.

4. Wipe the air filter housing and

cover clean to remove any dirt or

debris and to ensure good sealing.

5. Install a new air filter element. Be

careful not to crimp the filter element edges between the air filter

housing and cover. This could cause filter damage and allow unfiltered

air to enter the engine if not properly seated.

6. Replace the air filter housing cover and secure the clamps. Be sure

that the air cleaner cover tabs are engaged into the slots of the air

cleaner housing.

Maintenance and Specifications

253

2011 Transit Connect (tst)

Owners Guide, 2nd Printing

USA (fus)

1 2 ... 248 249 250 251 252 253 254 255 256 257 258 ... 294 295

Pas de commentaire

Ford 2011 Transit Connect v.2 Manuel d'utilisateur Page 253