Ford 2011 Ranger v.1 Manuel d'utilisateur télécharger pdf (Page 227)

State or local regulations on volatile organic compounds may restrict the

use of methanol, a common windshield washer antifreeze additive.

Washer fluids containing non-methanol antifreeze agents should be used

only if they provide cold weather protection without damaging the

vehicle’s paint finish, wiper blades or washer system.

WARNING: If you operate your vehicle in temperatures below

40°F (5°C), use washer fluid with antifreeze protection. Failure

to use washer fluid with antifreeze protection in cold weather could

result in impaired windshield vision and increase the risk of injury or

accident.

Note: Do not put washer fluid in the engine coolant reservoir. Washer

fluid placed in the cooling system may harm engine and cooling system

components.

CHANGING THE WIPER BLADES

1. Pull the wiper arm away from the

vehicle. Turn the blade at an angle

from the wiper arm. Press the lock

tab to release the blade and pull the

wiper blade down toward the

windshield to remove it from the

arm.

2. Attach the new wiper to the

wiper arm and press it into place

until a click is heard.

Replace wiper blades at least once per year for optimum performance.

Poor wiper quality can be improved by cleaning the wiper blades and the

windshield. Refer to Windows and wiper blades in the Cleaning

chapter.

To prolong the life of the wiper blades, it is highly recommended to

scrape off the ice on the windshield before turning on the wipers. The

layer of ice has many sharp edges and can damage the micro edge of the

wiper rubber element.

ENGINE OIL

Checking the engine oil

Refer to scheduled maintenance information for the appropriate

intervals for checking the engine oil.

Maintenance and Specifications

227

2011 Ranger (ran)

Owners Guide, 1st Printing

USA (fus)

1 2 ... 222 223 224 225 226 227 228 229 230 231 232 ... 301 302

Pas de commentaire

Ford 2011 Ranger v.1 Manuel d'utilisateur Page 227