Ford 2011 E-450 v.1 Manuel d'utilisateur télécharger pdf (Page 60)

100

101

Replacing high-mount brake lamp bulbs

On vehicles without a rear headliner, the interior cargo lamp (if

equipped) must be removed from under the high-mount brake lamp

assembly located inside the vehicle. Then, do the following:

1. Remove the two screws from the

high-mount brake lamp assembly

and lift the lamp from the vehicle.

2. Remove the bulb socket from the

lamp assembly by turning it

counterclockwise.

3. Carefully pull the bulb straight

out of the socket.

To install the new bulb, follow the removal procedure in reverse order.

Replacing license plate lamp bulbs

1. Turn the headlamp switch to the

off position.

2. Remove the two screws and the

license plate lamp assembly from

the rear door.

3. Remove bulb socket from lamp

assembly by turning it

counterclockwise.

4. Pull the bulb out from socket and

push in the new bulb.

To install the new bulb, follow the removal procedures in reverse order.

Lights

2011 Econoline (eco)

Owners Guide, 1st Printing

USA (fus)

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 336 337

Commentaires sur ces manuels

Pas de commentaire

Ford 2011 E-450 v.1 Manuel d'utilisateur Page 60

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2011 E-450 v.1