Ford 2011 E-450 v.1 Manuel d'utilisateur télécharger pdf (Page 51)

Flash-to-pass

Pull toward you slightly to activate

and release to deactivate.

PANEL DIMMER CONTROL

Use to adjust the brightness of the

instrument panel and all applicable

illuminated switches in the vehicle

during headlamp and park lamp

operation.

Move the control to the full upright

position, past detent, to turn on the

interior lamps.

Note: If the battery is disconnected,

discharged, or a new battery is

installed, the dimmer switch requires re-calibration. Rotate the dimmer

switch from the full dim position to the full dome/on position to reset.

This will ensure that your displays are visible under all lighting

conditions

The dome lamp will not illuminate if the control switch is not rotated

past the detent.

VERTICAL AND HORIZONTAL AIM ADJUSTMENT (SEALED BEAM

HEADLAMPS)

The headlamps on your vehicle are intended to be aimed using

mechanical aimers. If mechanical aimers are used and the cross-car sight

line is in any way blocked, set the legs of the universal adaptor all to the

same setting, such that the cross-car sight line is no longer blocked, per

the instructions for the brand of mechanical aimer used. You can also

aim the headlamps visually using the procedure below.

Lights

2011 Econoline (eco)

Owners Guide, 1st Printing

USA (fus)

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 336 337

Pas de commentaire

Ford 2011 E-450 v.1 Manuel d'utilisateur Page 51