Ford 2011 E-450 v.1 Manuel d'utilisateur télécharger pdf (Page 25)

6. Release the SELECT/RESET stem and allow the setup timer to expire

to exit the procedure.

Compass calibration adjustment

Note: For optimum calibration, drive to an open, level location away

from large metallic objects or structures. Switch off all non-essential

electrical accessories (heated rear window, heater, A/C, map lamps,

wiper, etc.) and make sure all the doors are closed.

1. Press and release the SELECT/RESET stem to scroll through the

information displays until the message center displays HOLD RESET

FOR SETUP MENU.

2. Press and hold the SELECT/RESET stem to get into the setup menu.

Repeatedly press it again to scroll through the setup menu until the

message center displays HOLD RESET FOR CALIBRATION.

3. Press and hold the SELECT/RESET stem for approximately two

seconds until the message center enters the compass zone adjustment

mode.

4. Press and hold the SELECT/RESET stem until the message center

displays CIRCLE SLOWLY TO CALIBRATE.

Note: This step may require up to five circles to complete the

calibration.

Note: If the SELECT/RESET stem is pressed during the calibration or

three minutes has elapsed since the beginning of the calibration without

driving the vehicle, the message center reverts back to normal operation

and the CAL will display until a successful calibration is carried out.

5. Slowly drive the vehicle in a circle less than 3 mph (5 km/h ) until the

CIRCLE SLOWLY TO CALIBRATE message changes to CALIBRATION

COMPLETED.

LANGUAGE = ENGLISH / SPANISH / FRENCH

Allows you to choose which language the message center will display in.

Selectable languages are English, Spanish, or French.

Note: When entering the setup menu and a non-English language has

been selected, “PRESS RESET FOR ENGLISH” will be displayed to

change back to English.

Press and hold the SELECT/RESET stem to select a new language.

Selectable languages are English, Spanish and French

Press and hold the SELECT/RESET stem to set the language choice.

Press the SELECT/RESET stem for the next setup menu item or wait for

more than four seconds to return to the info menu.

Instrument Cluster

2011 Econoline (eco)

Owners Guide, 1st Printing

USA (fus)

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 336 337

Pas de commentaire

Ford 2011 E-450 v.1 Manuel d'utilisateur Page 25