Ford 2011 E-450 v.1 Manuel d'utilisateur télécharger pdf (Page 201)

The adaptive transmission shift strategy allows the transmission to

relearn these operating parameters. This learning process could take

several transmission upshifts and downshifts; during this learning

process, slightly firmer shifts may occur. After this learning process,

normal shift feel and shift scheduling will resume.

P (Park)

This position locks the transmission and prevents the rear wheels from

turning.

To put your vehicle in gear:

1. Start the engine

2. Press the brake pedal

3. Move the gearshift lever into the desired gear

To put your vehicle in P (Park):

1. Come to a complete stop

2. Move the gearshift lever and securely latch it in P (Park)

WARNING: Always set the parking brake fully and make sure

the gearshift is latched in P (Park). Turn the ignition to the lock

position and remove the key whenever you leave your vehicle.

R (Reverse)

With the gearshift lever in R (Reverse), the vehicle will move backward.

Always come to a complete stop before shifting into and out of R

(Reverse).

N (Neutral)

With the gearshift lever in N (Neutral), the vehicle can be started and is

free to roll. Hold the brake pedal down while in this position.

D (Overdrive) with Tow/Haul off

D (Overdrive) with tow/haul off is the normal driving position for the

best fuel economy. The overdrive function allows automatic upshifts and

downshifts through gears one through five.

D (Overdrive) with Tow/Haul on

The tow/haul feature improves transmission operation when towing a

trailer or a heavy load. All transmission gear ranges are available when

using tow/haul.

Driving

201

2011 Econoline (eco)

Owners Guide, 1st Printing

USA (fus)

1 2 ... 196 197 198 199 200 201 202 203 204 205 206 ... 336 337

Pas de commentaire

Ford 2011 E-450 v.1 Manuel d'utilisateur Page 201