Ford 2010 Ranger v.2 Manuel d'utilisateur télécharger pdf (Page 180)

• 4x4 LOW – Momentarily

illuminates when the vehicle is

started. Illuminates when 4L

(4WD Low) is engaged.

Using the electronic shift 4WD

system

2H (2WD High) - Power to the

rear wheels only; used for street and

highway driving.

4H (4WD High) - Used for extra

traction such as in snow or icy roads

or in off-road situations. Not

intended for use on dry pavement.

4L (4WD Low) - Uses extra

gearing to provide maximum power to all four wheels. Intended only for

off-road applications such as deep sand, steep grades or pulling heavy

objects. 4L (4WD Low) will not engage while the vehicle is moving; this

is normal and should be no reason for concern. Refer to Shifting to/from

4L (4WD Low) for proper operation.

Shifting between 2H (2WD High) and 4H (4WD High)

• Move the 4WD control between 2H and 4H at a stop or any forward

speed.

Note: Do not perform this operation if the rear wheels are slipping.

Shifting to/from 4L (4WD Low)

Note: Some noise may be heard as the 4WD system shifts or engages.

This is normal and should be no reason for concern.

1. Bring the vehicle to a complete stop

2. On vehicles equipped with an automatic transmission, place the

transmission in N (Neutral); on vehicles equipped with a manual

transmission, press the clutch.

3. Move the 4WD control to the desired position.

• If shifting into 4L (4WD Low), wait for the 4WD LOW light in the

instrument cluster to turn on indicating the shift is complete.

• If shifting out of 4L (4WD Low), wait for the 4WD LOW light in the

instrument cluster to turn off indicating the shift is complete.

4x4

LOW

Driving

180

2010 Ranger (ran)

Owners Guide, 2nd Printing

USA (fus)

1 2 ... 175 176 177 178 179 180 181 182 183 184 185 ... 286 287

Pas de commentaire

Ford 2010 Ranger v.2 Manuel d'utilisateur Page 180