Ford 2010 Ranger v.2 Manuel d'utilisateur télécharger pdf (Page 159)

STARTING

Positions of the ignition

1. Accessory — allows the electrical

accessories such as the radio to

operate while the engine is not

running.

2. Lock — locks the steering wheel,

automatic transmission gearshift

lever and allows key removal. For

vehicles equipped with a manual

transmission, you must press the

ignition release lever to release the

key.

3. Off — shuts off the engine and all accessories without locking the

steering wheel.

4. On — all electrical circuits operational. Warning lights illuminated. Key

position when driving.

5. Start — cranks the engine. Release the key as soon as the engine

starts.

Preparing to start your vehicle

Engine starting is controlled by the powertrain control system.

Note: This system meets all Canadian interference-causing equipment

standard requirements regulating the impulse electrical field strength of

radio noise.

When starting a fuel-injected engine, don’t press the accelerator before

or during starting. Only use the accelerator when you have difficulty

starting the engine. For more information on starting the vehicle, refer to

Starting the engine in this chapter.

WARNING: Extended idling at high engine speeds can produce

very high temperatures in the engine and exhaust system,

creating the risk of fire or other damage.

WARNING: Do not park, idle, or drive your vehicle in dry grass

or other dry ground cover. The emission system heats up the

engine compartment and exhaust system, which can start a fire.

Driving

159

2010 Ranger (ran)

Owners Guide, 2nd Printing

USA (fus)

1 2 ... 154 155 156 157 158 159 160 161 162 163 164 ... 286 287

Pas de commentaire

Ford 2010 Ranger v.2 Manuel d'utilisateur Page 159