Ford 2010 Ranger v.2 Manuel d'utilisateur télécharger pdf (Page 208)

WARNING: To lessen the risk of personal injury, do not put any

part of your body under the vehicle while changing a tire. Do not

start the engine when your vehicle is on the jack. The jack is only

meant for changing the tire.

• Never use the differential as a jacking point.

5. Remove the wheel lug nuts with the lug wrench.

6. Replace the flat tire with the spare tire, making sure the valve stem is

facing outward. Reinstall the lug nuts until the wheel is snug against the

hub. Do not fully tighten the lug nuts until the wheel has been lowered.

7. Lower the wheel by turning the jack handle counterclockwise.

8. Remove the jack and fully tighten

the lug nuts, in the order shown.

Refer to Wheel lug nut torque

specifications later in this chapter

for the proper lug nut torque

specification.

9. Stow the flat tire. Refer to

Stowing the flat/spare tire.

10. Stow the jack and lug wrench.

Make sure the jack is fastened so it

does not rattle when you drive.

11. Unblock the wheels.

Stowing the flat/spare tire

Note: Failure to follow spare tire stowage instructions may result in

failure of cable or loss of spare tire.

Roadside Emergencies

208

2010 Ranger (ran)

Owners Guide, 2nd Printing

USA (fus)

1 2 ... 203 204 205 206 207 208 209 210 211 212 213 ... 286 287

Pas de commentaire

Ford 2010 Ranger v.2 Manuel d'utilisateur Page 208