Ford 2010 Ranger v.2 Manuel d'utilisateur télécharger pdf (Page 252)

Fuel filler cap

When fueling your vehicle:

1. Turn the engine off.

2. Carefully turn the fuel filler cap counterclockwise until it spins off.

3. Carefully hang the cap from the tether.

4. To install the cap, place the cap into the filler pipe and rotate until

you hear at least one click.

If the check fuel cap light

comes on, the fuel filler cap may not be

properly installed. The light can come on after several driving events

after you’ve refueled your vehicle.

At the next opportunity, safely pull off of the road, remove the fuel filler

cap, align the cap properly and reinstall it. The check fuel cap

light

may not reset immediately; it may take several driving cycles for

the check fuel cap light

to turn off. A driving cycle consists of an

engine start-up (after four or more hours with the engine off) followed

by city and highway driving.

Continuing to drive with the check fuel cap light

on may cause the

service engine soon

light to turn on as well.

If you must replace the fuel filler cap, replace it with a fuel filler

cap that is designed for your vehicle. The customer warranty may

be void for any damage to the fuel tank or fuel system if the

correct genuine Ford, Motorcraft or other certified fuel filler cap

is not used.

WARNING: The fuel system may be under pressure. If the fuel

filler cap is venting vapor or if you hear a hissing sound, wait

until it stops before completely removing the fuel filler cap. Otherwise,

fuel may spray out and injure you or others.

Maintenance and Specifications

252

2010 Ranger (ran)

Owners Guide, 2nd Printing

USA (fus)

1 2 ... 247 248 249 250 251 252 253 254 255 256 257 ... 286 287

Pas de commentaire

Ford 2010 Ranger v.2 Manuel d'utilisateur Page 252