Ford 2008 Focus v.3 Manuel d'utilisateur télécharger pdf (Page 219)

• If the oil level is between the

MIN and MAX marks, the oil

level is acceptable. DO NOT

ADD OIL.

• If the oil level is below the MIN

mark, add enough engine oil to

raise the level within the MIN and

MAX range. Refer to Adding

engine oil in this chapter.

• Oil levels above MAX mark

may cause engine damage. If

the engine is overfilled, some oil

must be removed from the engine

by an authorized dealer.

7. Put the dipstick back in and ensure it is fully seated.

Adding engine oil

1. Check the engine oil. For instructions, refer to Checking the engine

oil in this chapter.

2. If the engine oil level is not within the normal range, add only certified

engine oil of the recommended viscosity. Remove the engine oil filler cap

and use a funnel to pour the engine oil into the opening.

3. Recheck the engine oil level. Make sure the oil level is not above the

MAX mark on the engine oil level dipstick.

4. Install the dipstick and ensure it is fully seated.

5. Fully install the engine oil filler cap by turning the filler cap clockwise

tightly until clicks are heard, or until it is snug.

To avoid possible oil loss, DO NOT operate the vehicle with the

engine oil level dipstick and/or the engine oil filler cap removed.

2008 Focus (foc)

Owners Guide

USA (fus)

Maintenance and Specifications

219

1 2 ... 214 215 216 217 218 219 220 221 222 223 224 ... 257 258

Pas de commentaire

Ford 2008 Focus v.3 Manuel d'utilisateur Page 219