Ford 2006 Five Hundred v.3 Manuel d'utilisateur télécharger pdf (Page 243)

8. Add coolant/water mixture

through the thermostat housing

opening until full at housing

opening.

9. Install the thermostat housing

bleed plug. Install metal pin by

pushing into the slot.

After any coolant has been added, check the coolant concentration, refer

to the Checking engine coolant section. If the concentration is not

50/50 (protection to –34° F [–36° C]), drain some coolant and adjust the

concentration. It may take several drains and additions to obtain a 50/50

coolant concentration.

Whenever coolant has been added, the coolant level in the coolant

reservoir should be checked the next few times you drive the vehicle. If

necessary, add enough 50/50 concentration of engine coolant and

distilled water to bring the liquid level to the proper level.

2006 Five Hundred (500)

Owners Guide (post-2002-fmt)

USA (fus)

Maintenance and Specifications

243

1 2 ... 238 239 240 241 242 243 244 245 246 247 248 ... 279 280

Pas de commentaire

Ford 2006 Five Hundred v.3 Manuel d'utilisateur Page 243