Ford 2006 Escape Hybrid v.2 Manuel d'utilisateur télécharger pdf (Page 84)

100

101

Replacing brake/tail/turn/backup lamp bulbs

The brake/tail/turn/backup lamp bulbs are located in the tail lamp

assembly, one just below the other. Follow the same steps to replace

either bulb:

1. Make sure the headlamp switch is

in the OFF position and then open

the liftgate to expose the lamp

assemblies.

2. Remove the two screws from the

lamp assembly.

3. Carefully remove the lamp

assembly by pulling it rearward to

disengage snap features on the

outward side of the lamp.

4. Twist the bulb socket

counterclockwise and remove from

lamp assembly.

5. Pull the bulb straight out of the

socket and push in the new bulb.

6. To complete installation, follow

the removal procedure in reverse

order.

Replacing license plate lamp bulbs

1. Make sure the headlamp switch is

in the OFF position and then pry

the license plate lamp assembly

(located above the license plate)

from the liftgate.

2. Remove bulb socket from lamp

assembly by turning

counterclockwise.

REVIEW COPY ——

2006 Escape Hybrid (ehv), Owners Guide (post-2002-fmt) (own2002), Market: USA (fus)

Lights

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 339 340

Commentaires sur ces manuels

Pas de commentaire

Ford 2006 Escape Hybrid v.2 Manuel d'utilisateur Page 84

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2006 Escape Hybrid v.2