Ford 2006 Escape Hybrid v.2 Manuel d'utilisateur télécharger pdf (Page 79)

• (1) 8 feet (2.4 meters)

• (2) Center height of lamp to

ground

• (3) 25 feet (7.6 meters)

• (4) Horizontal reference line

2. Measure the height from the

center of your headlamp to the

ground and mark an 8 foot (2.4

meter) horizontal reference line on

the vertical wall or screen at this

height (a piece of masking tape works well). The center of the lamp is

marked by a 3.0 mm circle on the headlamp lens.

3. Turn on the low beam headlamps to illuminate the wall or screen and

open the hood. Cover the left-hand headlamp with an opaque cloth.

4. On the wall or screen you will

observe a light pattern with a

distinct horizontal edge of high

intensity light towards the right. If

this edge is not at the horizontal

reference line, the beam will need to

be adjusted.

5. Locate the vertical adjuster on

the headlamp, then usea4mm

socket to turn the adjuster either

counterclockwise (to adjust down)

or clockwise (to adjust up) aligning

the upper edge of the light pattern

to the horizontal line.

6. Move the opaque cloth to cover

the right-hand headlamp and repeat

Steps 4 and 5 for the left-hand

headlamp.

7. HORIZONTAL AIM IS NOT REQUIRED FOR THIS VEHICLE AND IS

NON-ADJUSTABLE.

8. Close the hood and turn off the lamps.

REVIEW COPY ——

2006 Escape Hybrid (ehv), Owners Guide (post-2002-fmt) (own2002), Market: USA (fus)

Lights

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 339 340

Pas de commentaire

Ford 2006 Escape Hybrid v.2 Manuel d'utilisateur Page 79