Ford 2005 Excursion v.3 Manuel d'utilisateur télécharger pdf (Page 147)

When a wheel is installed, always remove any corrosion, dirt or

foreign materials present on the mounting surfaces of the wheel

or the surface of the wheel hub, brake drum or brake disc that

contacts the wheel. Ensure that any fasteners that attach the rotor to

the hub are secured so they do not interfere with the mounting

surfaces of the wheel. Installing wheels without correct metal-to-metal

contact at the wheel mounting surfaces can cause the wheel nuts to

loosen and the wheel to come off while the vehicle is in motion,

resulting in loss of control.

INFORMATION CONTAINED ON THE TIRE SIDEWALL

Federal law requires tire manufacturers to place standardized

information on the sidewall of all tires. This information identifies and

describes the fundamental characteristics of the tire and also provides a

U.S. DOT Tire Identification Number for safety standard certification and

in case of a recall.

Information on “P” type tires

P215/65R15 95H is an example of a

tire size, load index and speed

rating. The definitions of these

items are listed below. (Note that

the tire size, load index and speed

rating for your vehicle may be

different from this example.)

1. P: Indicates a tire, designated by

the Tire and Rim Association

(T&RA), that may be used for

service on cars, SUVs, minivans and

light trucks.

Note: If your tire size does not

begin with a letter this may mean it

is designated by either ETRTO

(European Tire and Rim Technical Organization) or JATMA (Japan Tire

Manufacturing Association).

2. 215: Indicates the nominal width of the tire in millimeters from

sidewall edge to sidewall edge. In general, the larger the number, the

wider the tire.

2005 Excursion (hdw)

Owners Guide (post-2002-fmt)

USA (fus)

Tires, Wheels and Loading

147

1 2 ... 142 143 144 145 146 147 148 149 150 151 152 ... 279 280

Pas de commentaire

Ford 2005 Excursion v.3 Manuel d'utilisateur Page 147