Ford 2005 Excursion v.3 Manuel d'utilisateur télécharger pdf (Page 111)

How to disengage the automatic locking mode

Disconnect the combination lap/shoulder belt and allow it to retract

completely to disengage the automatic locking mode and activate the

vehicle sensitive (emergency) locking mode.

After any vehicle collision, the safety belt systems at all outboard

seating positions (except the driver position, which doesn’t have

this feature) must be checked by an authorized dealer to verify that

the automatic locking retractor feature for child seats is still

functioning properly. In addition, all seat belts should be checked for

proper function.

BELT AND RETRACTOR ASSEMBLY MUST BE REPLACED if

the seat belt assembly “automatic locking retractor” feature or

any other seat belt function is not operating properly when checked

according to the procedures in Workshop Manual. Failure to replace

the belt and retractor assembly could increase the risk of injury in

collisions.

Energy Management Feature

• This vehicle has a seat belt system with an energy management

feature at the front outboard seating positions to help further reduce

the risk of injury in the event of a head-on collision.

• The front outboard seat belt systems have a retractor assembly that is

designed to pay out webbing in a controlled manner. This feature is

designed to help reduce the belt force acting on the occupant’s chest.

Outboard safety belt height adjustment

Adjust the height of the shoulder

belt so the belt rests across the

middle of your shoulder.

To adjust the shoulder belt height,

push the button and slide the height

adjuster up or down. Release the

button and pull down on the height

adjuster to make sure it is locked in

place.

2005 Excursion (hdw)

Owners Guide (post-2002-fmt)

USA (fus)

Seating and Safety Restraints

111

1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 279 280

Pas de commentaire

Ford 2005 Excursion v.3 Manuel d'utilisateur Page 111