Ford 2004 Mustang v.3 Manuel d'utilisateur télécharger pdf (Page 80)

7. Confirmation of disabling BeltMinder is provided

by the safety belt warning light flashing four times

per second for three seconds.

8. Confirmation of enabling BeltMinder is provided

by:

• The safety belt warning light flashing four times

per second for three seconds.

• Followed by three seconds with the safety belt

warning light off.

• Once again, the safety belt warning light will flash

four times per second for three seconds.

9. After receiving confirmation, the

deactivation/activation procedure is complete.

Safety belt extension assembly

If the safety belt is too short when fully extended,

there is a 8 inch (20 cm) safety belt extension

assembly that can be added (part number 611C22).

This assembly can be obtained from your dealer at

no cost.

Use only extensions manufactured by the same

supplier as the safety belt. Manufacturer

identification is located at the end of the webbing on

the label. Also, use the safety belt extension only if

the safety belt is too short for you when fully

extended.

Do not use extensions to change the fit of

the shoulder belt across the torso.

Safety belt maintenance

Inspect the safety belt systems periodically to make

sure they work properly and are not damaged.

Inspect the safety belts to make sure there are no

nicks, tears or cuts. Replace if necessary. All safety

belt assemblies, including retractors, buckles, front

seat belt buckle assemblies, buckle support

assemblies (slide bar-if equipped), shoulder belt

height adjusters (if equipped), shoulder belt guide

2004 04- Mustang (mus)

Owners Guide (post-2002-fmt)

USA English (fus)

Seating and Safety Restraints

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 239 240

Pas de commentaire

Ford 2004 Mustang v.3 Manuel d'utilisateur Page 80