Ford 2003 Taurus v.2 Manuel d'utilisateur télécharger pdf (Page 59)

Do not place any objects on the cargo area cover. They may

obstruct your vision or strike occupants of the vehicle in the

case of a sudden stop or collision.

The cover may cause injury in a sudden stop or accident if it is

not securely installed.

Rewinding the shade

With extended use, the cargo shade may lose its spring tension. If this

occurs, the shade must be manually rewound. This is a two-person

operation.

1. Remove the shade from the vehicle and extend it with the smooth

grain facing you.

2. Wrap the vinyl around the roller

tube twice. Tuck the edges of the

vinyl inside the end cap with each

wrap.

3. Fold the edges of the vinyl

towards the center, making sure

that the edges clear the end cap

slots. Use tape or a rubber band to

hold the vinyl to the left side of the

tube.

4. Push in the right end cap

(marked RH) about

⁄

of the total

length to disengage the clutch and

hold the end cap in while turning

the roller tube toward you 14 times.

5. Let go of the right end cap. The

clutch will now engage and stop the

shade from losing its spring tension.

6. Unfold the vinyl and place it into

the end cap slots.

7. Insert the shade into the side mounting brackets and check to make

sure that it operates properly.

Driver Controls

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 215 216

Pas de commentaire

Ford 2003 Taurus v.2 Manuel d'utilisateur Page 59