Ford 2003 F-550 v.1 Manuel d'utilisateur télécharger pdf (Page 49)

Setting speed control

The controls for using your speed

control are located on the steering

wheel for your convenience.

1. Press the ON control and release

it.

2. Accelerate to the desired speed.

3. Press the SET ACCEL control

and release it.

4. Take your foot off the accelerator

pedal.

5. The indicator light on the

instrument cluster will turn on.

Note:

• Vehicle speed may vary momentarily when driving up and down a

steep hill.

• If the vehicle speed increases above the set speed on a downhill, you

may want to apply the brakes to reduce the speed.

• If the vehicle speed decreases more than 16 km/h (10 mph) below

your set speed on an uphill, your speed control will disengage.

Resuming a set speed

Press the RES (resume) control and

release it. This will automatically

return the vehicle to the previously

set speed. The RES control will not

work if the vehicle speed is not

faster than 48 km/h (30 mph).

Increasing speed while using speed control

There are two ways to set a higher

speed:

• Press and hold the SET ACCEL

control until you get to the

desired speed, then release the

control. You can also use the SET

ACCEL control to operate the

Driver Controls

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 255 256

Pas de commentaire

Ford 2003 F-550 v.1 Manuel d'utilisateur Page 49