Ford 2003 F-550 v.1 Manuel d'utilisateur télécharger pdf (Page 218)

The transmission fluid should be in

this range if at normal operating

temperature (66°C-77°C

[150°F-170°F]).

The transmission fluid should be in

this range if at ambient temperature

(10°C-35°C [50°F-95°F]).

High fluid level

Fluid levels above the safe range

may result in transmission failure.

An overfill condition of transmission

fluid may cause shift and/or

engagement concerns and/or

possible damage.

High fluid levels can be caused by

an overheating condition.

Adjusting automatic transmission fluid levels

Before adding any fluid, make sure the correct type is used. The type of

fluid used is normally indicated on the dipstick and also in the

Lubricant specifications section in this chapter.

Use of a non-approved automatic transmission fluid may cause

internal transmission component damage.

If necessary, add fluid in 250 ml (1/2 pint) increments through the filler

tube until the level is correct.

If an overfill occurs, excess fluid

should be removed by a qualified

technician.

An overfill condition of transmission fluid may cause shift and/or

engagement concerns and/or possible damage.

ADD COLD HOT DO NOT ADD

DON'T ADD IF IN CROSSHATCHED AREA • CHECK WHEN HOT IDLING IN PARK

ADD COLD HOT DO NOT ADD

DON'T ADD IF IN CROSSHATCHED AREA • CHECK WHEN HOT IDLING IN PARK

ADD COLD HOT DO NOT ADD

DON'T ADD IF IN CROSSHATCHED AREA • CHECK WHEN HOT IDLING IN PARK

ADD COLD HOT DO NOT ADD

DON'T ADD IF IN CROSSHATCHED AREA • CHECK WHEN HOT IDLING IN PARK

Maintenance and Specifications

218

1 2 ... 213 214 215 216 217 218 219 220 221 222 223 ... 255 256

Pas de commentaire

Ford 2003 F-550 v.1 Manuel d'utilisateur Page 218