Ford 2003 Explorer v.2 Manuel d'utilisateur télécharger pdf (Page 154)

Using the Control Trac 4WD system

4X4 AUTO - Power to all four wheels; used for normal street and

highway driving.

4X4 HIGH (4WD High) - Used for extra traction such as in snow or icy

roads or in off-road situations. Not intended for use on dry pavement.

4X4 LOW (4WD Low) - Uses extra gearing to provide maximum power

to all four wheels. Intended only for off-road applications such as deep

sand, steep grades or pulling heavy objects. 4X4 LOW (4WD Low) will

not engage while the vehicle is moving; this is normal and should be no

reason for concern. Refer to Shifting to/from 4X4 LOW (4WD Low) for

proper operation.

Shifting between 4X4 AUTO (4WD Auto) and 4X4 HIGH (4WD High)

• Select 4X4 AUTO (4WD Auto) or 4X4 HIGH (4WD High) at any

forward speed.

Note: Do not perform this operation at speeds above 72 km/h (45 mph)

if the outside temperature is below 0°C (32°F).

Note: Do not perform this operation if the rear wheels are slipping.

Shifting to/from 4X4 LOW (4WD Low)

1. Bring the vehicle to a complete stop

2. Depress the brake

3. Place the transmission in N (Neutral).

Driving

154

1 2 ... 149 150 151 152 153 154 155 156 157 158 159 ... 279 280

Pas de commentaire

Ford 2003 Explorer v.2 Manuel d'utilisateur Page 154