Ford 2003 Explorer v.2 Manuel d'utilisateur télécharger pdf (Page 80)

If there is any potential remote keyless entry problem with your vehicle,

ensure ALL remote entry transmitters are brought to the dealership, to

aid in troubleshooting.

Unlocking the doors

1. Press and release to unlock the driver’s door. Note: The interior

lamps will illuminate.

2. Press

and release again within three seconds to unlock all the

doors.

The remote entry system activates the illuminated entry feature. This

feature turns on the interior lamps for 25 seconds or until the ignition is

turned to the ON position. If the dome lamp control is in the off position

the illuminated entry feature will not work.

The inside lights will not turn off if:

• they have been turned on using the dimmer control or

• any door is open.

The battery saver feature will turn off the interior lamps 30 minutes after

the ignition is turned to the OFF position.

Locking the doors/liftgate

1. Press and release to lock all the doors and liftgate. The lamps will

flash.Note: If any door, the liftgate, liftgate glass or hood (on vehicles

equipped with perimeter anti-theft) are not closed properly, the lamps

will not flash.

2. Press

and release again within three seconds to confirm that all the

doors are closed and locked. Note: the doors will lock again, the horn

will chirp and the lamps flash once.

Opening the liftgate window

Press

to unlatch the liftgate window.

Sounding a panic alarm

Press

to activate the alarm. The horn will sound for a maximum of

30 seconds and the parklamps will flash for a maximum of 3 minutes.

Press again or turn the ignition to ON to deactivate, or wait for the alarm

to timeout in 3 minutes.

Note: The panic alarm will only operate when the ignition is in the OFF

or ACC position.

Locks and Security

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 279 280

Pas de commentaire

Ford 2003 Explorer v.2 Manuel d'utilisateur Page 80