Ford 2002 E-450 v.2 Manuel d'utilisateur télécharger pdf (Page 95)

Compass zone adjustment

1. Determine which magnetic zone

you are in by referring to the zone

map.

2. Turn the ignition to the ON

position.

3. Press and hold the SELECT

control until VAR appears in the

display, then release. The display

should show the current zone

number.

4. Press the SELECT control until

the desired zone number appears.

The display will flash and then

return to normal operation. The zone is now updated.

Compass calibration adjustment

Perform this adjustment in an open

area free from steel structures and

high voltage lines:

• Press and hold the SELECT

control until CAL appears in the

display (approximately eight

seconds) and release.

• Drive the vehicle slowly (less

than 5 km/h [3 mph]) in circles until CAL indicator turns off in about

2–3 complete circles.

• The compass is now calibrated.

123

6 7 8 9 1011

9 VAR

CAL

Driver Controls

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 255 256

Pas de commentaire

Ford 2002 E-450 v.2 Manuel d'utilisateur Page 95