Ford 2002 E-450 v.2 Manuel d'utilisateur télécharger pdf (Page 82)

Replacing front parking lamp/turn signal bulbs

1. Make sure the headlamp control is in the OFF position and then open

the hood.

2. Remove two screws and pull lamp assembly away from the vehicle.

3. Rotate the bulb socket

counterclockwise and remove.

4. Carefully pull the bulb straight

out of the socket.

To complete installation, follow the

removal procedures in reverse order.

Replacing roof marker bulbs

1. Remove the screw and lens from

the lamp assembly.

2. Carefully pull the bulb straight

out of the socket and push in the

new bulb.

3. Install lens on lamp assembly with

screw.

Replacing high-mount brakelamp bulbs

The interior cargo lamp (if equipped) will have to be removed from

under the high-mount brakelamp assembly located inside the vehicle.

To change the high-mount

brakelamp bulbs:

1. Remove the two screws from the

high-mount brakelamp assembly and

lift the lamp from the vehicle.

2. Remove the bulb socket from the

lamp assembly by turning

counterclockwise.

3. Carefully pull the bulb straight out

of the socket and push in the new bulb.

4. Install bulb socket in lamp assembly by turning clockwise.

5. Install brakelamp assembly on the vehicle with two screws.

Lights

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 255 256

Pas de commentaire

Ford 2002 E-450 v.2 Manuel d'utilisateur Page 82