Ford 2002 E-450 v.2 Manuel d'utilisateur télécharger pdf (Page 171)

If the vehicle slips off the jack, you or someone else could be

seriously injured.

6. Remove the spare tire and jack

from the storage location.

7. Use the tapered end of the lug

nut wrench to unscrew wheel

ornaments attached by retaining

screws. Remove any wheel trim.

Insert the tapered end of the lug

nut wrench behind wheel covers or

hubcaps and twist off.

8. Loosen the wheel nut by pulling

up on the handle of the lug nut

wrench about one-half turn

(counterclockwise). Do not remove

the wheel lug nuts until you raise

the tire off the ground.

Replacing the tire

1. Assemble the jack handle sections together and lock into the jack. Use

the jack handle to slide the jack under the vehicle.

To lessen the risk of personal injury, do not put any part of your

body under the vehicle while changing a tire. Do not start the

engine when your vehicle is on the jack. The jack is only meant for

changing the tire.

2. Position the jack to raise the front or rear wheel.

Roadside Emergencies

171

1 2 ... 166 167 168 169 170 171 172 173 174 175 176 ... 255 256

Pas de commentaire

Ford 2002 E-450 v.2 Manuel d'utilisateur Page 171