Ford 2014 Fusion Hybrid v.2 Manuel d'utilisateur télécharger pdf (Page 95)

Empower

Empower adds an engine on/off threshold

to the power demand gauge from

Enlighten. The threshold is shown as a blue

double outline. The gauge is designed to

show you how close you are to the gasoline

engine on/off threshold and how much

power you are requesting based on how

far you press the accelerator pedal.

When power demand is below the

threshold the vehicle is operating on

battery power only with the engine off, EV

is displayed and the gauge fill is shown in

blue.

When power demand exceeds the

threshold both the engine and the high

voltage battery provide power and the

gauge fill is white.

When power demand surpasses the amber

indicator, this level of demand and

associated fuel economy are shown in

amber.

Note: You can reset your average fuel

economy by pressing and holding the OK

button on the left hand steering wheel

controls.

MyView

You can choose what to display in this

view. Selecting Change MyView in the

options menu allows you to scroll through

two columns of content choices.

• Press the up or down arrow to view

content.

• Use the right and left arrows to move

between the left column content and

the middle column content.

• The right column is reserved for the

Battery Gauge and the Fuel Gauge.

Once you have your desired content

showing in each column then press OK to

save. This becomes your new MyView

screen.

Unique content available in MyView:

• Accessory Power— Indicates electrical

power demands from your vehicle’s

accessory systems. Accessories use

power but do not contribute to

propelling the vehicle. The gauge

separately displays power demand in

kilowatts (kW) for climate and other

accessories.Climate includes the power

being used by high voltage climate

control components such as the

electric A/C compressor and the

electric heater (Energi vehicles

only)Other includes all power being

used by the low voltage accessories

(cabin fans, headlights, heated seats,

etc.).

• Coolant Temp – Indicates engine

coolant temperature. At normal

operating temperature, the level

indicator will be white and will be in the

normal range (between H and C). If the

engine coolant temperature exceeds

the normal range, the level indicator

will change to red to indicate that the

engine is overheating. Stop the vehicle

as soon as safely possible, turn off the

vehicle and let the engine cool.

The thermometer indicator next to the

gauge will illuminate in blue or white to

indicate the following (not available for

Energi vehicles):

• Blue thermometer - This indicates that

the hybrid system is not warm enough

to allow EV operation. The gasoline

engine will typically run continuously

when the indicator is blue.

92

Fusion/Mondeo (CC7)

Information Displays

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 477 478

Commentaires sur ces manuels

Pas de commentaire