Ford 2014 Fusion Hybrid v.2 Manuel d'utilisateur télécharger pdf (Page 144)

HYBRID ELECTRIC VEHICLE

Plug-in Power Mode and Hybrid

Mode (Fusion Energi Only)

You must plug in your Fusion Energi vehicle

regularly for optimal use of the high

voltage battery's extended range

capability. When you charge your vehicle,

you add electrical energy that is then used

to propel the vehicle in plug-in power

mode. You can view your estimated

electric range in this mode from the

enhanced battery gauge on the instrument

panel display. The system maximizes the

use of electric-only operation in plug-in

power mode. System conditions may

require engine operation; however, the

system uses plug-in power whenever

possible.

When your plug-in power has been

depleted, the powertrain system will

automatically switch to hybrid mode. Your

battery gauge will show an electric range

of zero before transitioning to a simple

battery graphic upon entering hybrid mode.

Hybrid mode uses both the gasoline engine

and electric motor to power your vehicle

and maximize fuel economy as with Fusion

Hybrid.

EV Modes (Fusion Energi Only)

E144814

Your vehicle contains selectable

EV modes through the EV button

on the center console.

These modes are available when the

vehicle can run under high voltage battery

power. With the vehicle in driving mode,

you can change EV modes with each press

of the EV button. The current mode

displays in the left hand instrument cluster

screen.

Auto EV

E155152

This mode provides an

automatic use of high voltage

battery power during the drive,

staying in electric mode when possible and

running the engine when needed. This

mode will be the only one available if the

plug-in power has been depleted.

EV Now

E144814

This mode provides an electric

only driving experience using

plug-in power. The left-hand

information display will change to an

Energy Use screen that supplies EV specific

tools and functions. The vehicle may

accelerate more slowly and the top speed

may be lower than in Auto mode. Your

engine may be enabled at any time by

using one of the following methods:

1. Press the OK button on the left 5–way

steering wheel control while viewing

the Energy Use screen. The vehicle will

enable the engine as needed, and will

automatically return to EV Now after

eight seconds or when the engine is no

longer needed.

2. Press the accelerator pedal fully. A pop

up message stating Press OK to

Enable Engine will appear. Press OK

on the left steering wheel button to

activate as needed. The message will

disappear if you release the accelerator

pedal.

3. Press the EV button. This will change

the mode to EV Later and permit

engine operation.

The vehicle may automatically enter

Engine Enabled mode if system conditions

require it. A message Engine Enabled for

System Performance will display if this

occurs. This is normal function, and your

vehicle will return to EV Now when

possible.

141

Fusion/Mondeo (CC7)

Unique Driving Characteristics

1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 477 478

Commentaires sur ces manuels

Pas de commentaire