Ford 2014 Fusion Hybrid v.2 Manuel d'utilisateur télécharger pdf (Page 75)

Once the system is active, the high beams

will switch on if:

• the ambient light level is low enough

• there is no traffic in front of the vehicle

• the vehicle speed is greater than

25 mph (40 km/h)

The high beams will switch off if:

• the system detects the headlamps of

an approaching vehicle or the tail

lamps of a preceding vehicle.

• vehicle speed falls below 16 mph

(25 km/h)

• the ambient light level is high enough

that high beams are not required

• the system detects severe rain, snow

or fog

• the camera is blocked

Activating the System

Switch on the system using the information

display and autolamps. See Information

Displays (page 88). See Autolamps

(page 69).

E142451

Switch the lighting control to the

autolamps position.

Manually Overriding the System

E169254

When the automatic control has activated

the high beams, pushing or pulling the stalk

will provide a temporary override to low

beam.

Use the information display menu to

permanently deactivate the system, or turn

the lighting control switch from autolamps

to headlamps.

FRONT FOG LAMPS (IF EQUIPPED)

E142453

Press the control to switch the fog lamps

on or off.

You can switch the fog lamps on when the

lighting control is in any position except

Off and the high beams are not on.

72

Fusion/Mondeo (CC7)

Lighting

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 477 478

Commentaires sur ces manuels

Pas de commentaire