Ford 2014 Fusion Hybrid v.2 Manuel d'utilisateur télécharger pdf (Page 192)

E144529

When you override the system,

the green indicator light

illuminates and the lead vehicle

graphic does not show in the

information display.

The system will resume operation when

you release the accelerator pedal. The

vehicle speed will decrease to the set

speed, or a lower speed if following a

slower vehicle.

Changing the Set Speed

• Accelerate or brake to the desired

speed, then press and release SET+.

• Press and hold SET+ or SET- until the

desired set speed shows on the

information display. The vehicle speed

will gradually change to the selected

speed.

• Press and release SET+ or SET-. The

set speed will change in approximately

1 mph (2 km/h) increments.

The system may apply the brakes to slow

the vehicle to the new set speed. The set

speed will display continuously in the

information display while the system is

active.

Resuming the Set Speed

Note: Only use resume if you are aware of

the set speed and intend to return to it.

Press and release RES. The vehicle will

return to the previously set speed. The set

speed will display continuously in the

information display while the system is

active.

Low Speed Automatic

Cancellation

The system is not functional at vehicle

speeds below 12 mph (20 km/h). An

audible alarm will sound and the

automatic braking releases if the vehicle

drops below this speed.

Hilly Condition Usage

Note: An audible alarm will sound and the

system will shut down if it is applying brakes

for an extended period of time. This allows

the brakes to cool down. The system will

function normally again when the brakes

have cooled down.

You should select a lower gear position

when the system is active in situations

such as prolonged downhill driving on

steep grades, for example in mountainous

areas. The system needs additional engine

braking in these situations to reduce the

load on the vehicle’s regular brake system

to prevent them from overheating.

Switching the System Off

Note: The set speed memory erases when

you switch off the system.

Press and release OFF or turn off the

ignition.

Detection Issues

The radar sensor has a limited field of

vision. It may not detect vehicles at all or

detect a vehicle later than expected in

some situations. The lead vehicle graphic

will not illuminate if the system does not

detect a vehicle in front of you.

189

Fusion/Mondeo (CC7)

Cruise Control

1 2 ... 187 188 189 190 191 192 193 194 195 196 197 ... 477 478

Commentaires sur ces manuels

Pas de commentaire