Ford 2014 Fusion Hybrid v.2 Manuel d'utilisateur télécharger pdf (Page 250)

• Do not use alcohol, methanol, brine or

any engine coolants mixed with alcohol

or methanol antifreeze (coolant).

Alcohol and other liquids can cause

engine damage from overheating or

freezing.

• Do not add extra inhibitors or additives

to the coolant. These can be harmful

and compromise the corrosion

protection of the engine coolant.

Adding Engine Coolant

1. Unscrew the engine coolant reservoir

cap slowly. Any pressure will escape

as you unscrew the cap.

2. Use a funnel to add prediluted engine

coolant to the engine coolant reservoir.

Make sure that the level is between the

MIN and MAX marks on the engine

coolant reservoir. Use prediluted engine

coolant meeting the Ford specification.

See Capacities and Specifications

(page 294).

3. Close the engine coolant reservoir cap.

Whenever you add coolant, check the

coolant level in the engine coolant reservoir

the next few times you drive the vehicle. If

necessary, add enough prediluted engine

coolant to bring the engine coolant level

to the proper level.

Adding Inverter System Controller

Coolant

1. Open the inverter system controller

coolant reservoir cap.

2. Use a funnel to add prediluted coolant

to the inverter system controller

coolant reservoir. Make sure that the

level is between the MIN and MAX

marks on the inverter system controller

coolant reservoir. Use prediluted

coolant meeting the Ford specification.

See Capacities and Specifications

(page 294).

3. Close the inverter system controller

coolant reservoir cap.

Whenever you add coolant, check the

coolant level in the inverter system

controller coolant reservoir the next few

times you drive the vehicle. If necessary,

add enough prediluted coolant to bring the

inverter system controller coolant level to

the proper level.

Recycled Engine Coolant

Ford Motor Company does not recommend

the use of recycled engine coolant since a

Ford-approved recycling process is not yet

available.

Used engine coolant should be disposed

of in an appropriate manner. Follow your

community’s regulations and standards

for recycling and disposing of automotive

fluids.

Severe Climates

If you drive in extremely cold climates:

• It may be necessary to have an

authorized Ford dealer increase the

coolant concentration above 50%.

• A coolant concentration of 60% will

provide improved freeze point

protection. Engine coolant

concentrations above 60% will

decrease the overheat protection

characteristics of the engine coolant

and may cause engine damage.

If you drive in extremely hot climates:

• It may be necessary to have an

authorized Ford dealer decrease the

coolant concentration to 40%.

• A coolant concentration of 40% will

provide improved overheat protection.

Engine coolant concentrations below

40% will decrease the corrosion/freeze

protection characteristics of the engine

coolant and may cause engine

damage.

247

Fusion/Mondeo (CC7)

Maintenance

1 2 ... 245 246 247 248 249 250 251 252 253 254 255 ... 477 478

Commentaires sur ces manuels

Pas de commentaire