Ford 2014 Fusion v.3 Manuel d'utilisateur télécharger pdf (Page 169)

Note: If the electric parking brake warning

lamp stays illuminated, the electric parking

brake will not automatically release. You

must release the electric parking brake using

the electric parking brake switch.

Note: On manual transmission vehicles, if

the transmission is not in neutral (N) when

you release the clutch pedal and press the

accelerator pedal, the electric parking brake

will release automatically.

Note: On manual transmission vehicles, the

clutch pedal must be fully pressed before

the drive away release feature will operate.

Drive as normal using the accelerator and

clutch pedals and the electric parking brake

will be automatically released.

The brake system warning lamp will go off

to confirm that the electric parking brake

has been released.

Note: The electric parking brake drive away

release makes starting on a hill easier. This

feature will release the parking brake

automatically when the vehicle has

sufficient drive force to move up the hill. To

assure drive away release when starting

uphill, press the accelerator pedal quickly.

Battery With No Charge

WARNING

You will not be able to apply or

release the electric parking brake if

the battery is low or has no charge.

If the battery is low or has no charge, use

jumper cables and a booster battery.

HILL START ASSIST

WARNINGS

The system does not replace the

parking brake. When you leave your

vehicle, always apply the parking

brake and put the transmission in park (P).

WARNINGS

You must remain in your vehicle once

you have activated the system.

During all times, you are responsible

for controlling your vehicle,

supervising the system and

intervening, if required.

If the engine is revved excessively, or

if a malfunction is detected, the

system will be deactivated.

The system makes it easier to pull away

when your vehicle is on a slope without the

need to use the parking brake.

When the system is active, your vehicle will

remain stationary on the slope for two to

three seconds after you release the brake

pedal. This allows you time to move your

foot from the brake to the accelerator

pedal. The brakes are released

automatically once the engine has

developed sufficient drive to prevent your

vehicle from rolling down the slope. This

is an advantage when pulling away on a

slope, (for example from a car park ramp,

traffic lights or when reversing uphill into

a parking space).

The system will activate automatically on

any slope that will cause significant vehicle

rollback.

Using Hill Start Assist

1. Press the brake pedal to bring your

vehicle to a complete standstill. Keep

the brake pedal pressed.

2. If the sensors detect that your vehicle

is on a slope, the system will activate

automatically.

3. When you remove your foot from the

brake pedal, your vehicle will remain

on the slope without rolling away for

about two or three seconds. This hold

time will automatically be extended if

you are in the process of driving off.

166

Fusion (CC7) , enUSA

Brakes

1 2 ... 164 165 166 167 168 169 170 171 172 173 174 ... 457 458

Commentaires sur ces manuels

Pas de commentaire