Ford 2014 Fusion v.3 Manuel d'utilisateur télécharger pdf (Page 66)

4. Within 10 seconds, place a second

programmed intelligent access key in

the backup slot and press the

START/STOP button.

5. Wait 5 seconds, and then press the

START/STOP button again.

6. Remove the intelligent access key.

7. Wait 5 seconds, then place the

unprogrammed intelligent access key

in the backup slot and press the

START/STOP button.

Programming is now complete. Verify the

remote control functions operate and your

vehicle starts with the new intelligent

access key.

If programming was not successful, wait

10 seconds and repeat Steps 1 through 7.

If you are still unsuccessful, take your

vehicle to your authorized dealer.

ANTI-THEFT ALARM

The system will warn you of an

unauthorized entry to your vehicle. It will

be triggered if any door, the luggage

compartment or the hood is opened

without using the key, remote control or

keyless entry keypad.

The direction indicators will flash and the

horn will sound if unauthorized entry is

attempted while the alarm is armed.

Take all remote controls to an authorized

dealer if there is any potential alarm

problem with your vehicle.

Arming the Alarm

The alarm is ready to arm when there is

not a key in the ignition. Electronically lock

the vehicle to arm the alarm.

Disarming the Alarm

Disarm the alarm by any of the following

actions:

• Unlock the doors or luggage

compartment with the remote control

or keyless entry keypad.

• Switch the ignition on or start the

vehicle.

• Use a key in the driver’s door to unlock

the vehicle, then switch the ignition on

within 12 seconds.

Note: Pressing the panic button on the

remote control will stop the horn and signal

indicators, but will not disarm the system.

63

Fusion (CC7) , enUSA

Security

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 457 458

Commentaires sur ces manuels

Pas de commentaire