Ford 2014 Fusion v.3 Manuel d'utilisateur télécharger pdf (Page 275)

When weather temperature

changes occur, tire inflation

pressures also change. A 10°F

(6°C) temperature drop can

cause a corresponding drop of 1

psi (7 kPa) in inflation pressure.

Check your tire pressures

frequently and adjust them to the

proper pressure which can be

found on the Safety Compliance

Certification Label or Tire Label.

To check the pressure in your

tire(s):

1. Make sure the tires are cool,

meaning they are not hot from

driving even a mile.

Note: If you are checking tire

pressure when the tire is hot, (for

example, driven more than 1 mile

[1.6 kilometers]), never bleed or

reduce air pressure. The tires are

hot from driving and it is normal for

pressures to increase above

recommended cold pressures. A

hot tire at or below recommended

cold inflation pressure could be

significantly under-inflated.

Note: If you have to drive a

distance to get air for your tire(s),

check and record the tire pressure

first and add the appropriate air

pressure when you get to the

pump. It is normal for tires to heat

up and the air pressure inside to go

up as you drive.

2. Remove the cap from the valve

on one tire, then firmly press the

tire gauge onto the valve and

measure the pressure.

3. Add enough air to reach the

recommended air pressure.

Note: If you overfill the tire, release

air by pressing on the metal stem

in the center of the valve. Then

recheck the pressure with your tire

gauge.

4. Replace the valve cap.

5. Repeat this procedure for each

tire, including the spare.

Note: Some spare tires operate at

a higher inflation pressure than the

other tires. For T type mini-spare

tires, (see the Dissimilar spare

wheel and tire assembly

information for a description. Store

and maintain at 60 psi (4.15 bar).

For full-size and dissimilar spare

tires, see the Dissimilar spare wheel

and tire assembly information for

a description. Store and maintain

at the higher of the front and rear

inflation pressure as shown on the

Tire Label.

6. Visually inspect the tires to

make sure there are no nails or

other objects embedded that

could poke a hole in the tire and

cause an air leak.

7. Check the sidewalls to make

sure there are no gouges, cuts or

bulges.

272

Fusion (CC7) , enUSA

Wheels and Tires

1 2 ... 270 271 272 273 274 275 276 277 278 279 280 ... 457 458

Commentaires sur ces manuels

Pas de commentaire