Ford 2014 Fusion v.3 Manuel d'utilisateur télécharger pdf (Page 250)

5. Run the engine until it reaches normal

operating temperature. While the

engine is warming up, complete the

following: Reset the clock. See Audio

System (page 294). Reset the power

windows bounce-back feature. See

Windows and Mirrors (page 75).

Reset the radio station presets. See

Audio System (page 294).

6. Allow the engine to idle for at least one

minute. If the engine turns off, step on

the accelerator to start the engine.

7. While the engine is running, step on the

brake pedal and shift the transmission

to N.

8. Allow the engine to run for at least one

minute by pressing on the accelerator

pedal.

9. Drive the vehicle at least 10 miles (16

kilometers) to completely relearn the

idle and fuel trim strategy.

Note: If you do not allow the engine to

relearn the idle and fuel trim strategy, the

idle quality of your vehicle may be adversely

affected until the engine computer

eventually relearns the idle trim and fuel

trim strategy.

Note: Always dispose of automotive

batteries in a responsible manner. Follow

your local authorized standards for disposal.

Call your local authorized recycling center

to find out more about recycling automotive

batteries.

Note: It is recommended that the negative

battery cable terminal be disconnected from

the battery if you plan to store your vehicle

for an extended period of time.

CHECKING THE WIPER

BLADES

E142463

Run the tip of your fingers over the edge of

the blade to check for roughness.

Clean the wiper blades with washer fluid

or water applied with a soft sponge or

cloth.

CHANGING THE WIPER

BLADES

The wiper arms can be manually moved

when the ignition is off. This allows for ease

of blade replacement and cleaning under

the blades.

E129990

1

1

2

1. Pull the wiper blade and arm away

from the glass.

2. Press the locking buttons together.

3. Rotate and remove the wiper blade.

4. Install in the reverse order.

247

Fusion (CC7) , enUSA

Maintenance

1 2 ... 245 246 247 248 249 250 251 252 253 254 255 ... 457 458

Commentaires sur ces manuels

Pas de commentaire