Ford 2012 Flex v.2 Manuel d'utilisateur télécharger pdf (Page 266)

If the fuse is not blown and the brake lamps are working properly, the

following procedure will allow you to move the gearshift lever from P

(Park):

1. Apply the parking brake, turn the

ignition off, and remove the key.

2. Using a screwdriver (or similar

tool), carefully pry off and remove

the chrome trim ring (1) from the

shifter base.

3. Open the storage compartment

lid and carefully pry the trim panel

(2) up from rear attachments on the

storage compartment and

disconnect it from the console.

4. Locate the brake shift interlock

lever on the passenger side of the

shifter assembly.

5. Apply the brake pedal. Using a

screwdriver (or similar tool), press

and hold the brake shift interlock

lever while pulling the gearshift

lever out of the P (Park) and into

the N (Neutral).

6. Install the trim panel (2) and

then the chrome ring (1).

7. Apply the brake pedal, start the engine and release the parking brake.

AUTOMATIC TRANSMISSION OPERATION

Automatic transmission adaptive learning

Your transmission is equipped with an adaptive learning strategy found in

the vehicle computer. This feature is designed to increase durability and

provide consistent shift feel over the life of the vehicle. A new vehicle or

transmission may have firm and/or soft shifts. This operation is

considered normal and will not affect function or durability of the

transmission. Over time, the adaptive learning process will fully update

transmission operation. Additionally, whenever the battery is

disconnected or a new battery installed, the strategy must be relearned.

Driving

265

2012 Flex (471)

Owners Guide, 2nd Printing

USA (fus)

1 2 ... 261 262 263 264 265 266 267 268 269 270 271 ... 406 407

Pas de commentaire

Ford 2012 Flex v.2 Manuel d'utilisateur Page 266