Ford 2011 Taurus v.1 Manuel d'utilisateur télécharger pdf (Page 89)

Note:

• Vehicle speed may vary momentarily when driving up and down a

steep hill.

• If the vehicle speed increases above the set speed on a downhill, you

may want to apply the brakes to reduce the speed.

• If the vehicle speed decreases more than 10 mph (16 km/h) below

your set speed on an uphill, your speed control will disengage.

Disengaging speed control

Press the brake pedal to disengage the speed control. Disengaging the

speed control will not erase the previous set speed.

Resuming a set speed

Press and release RESUME. This will automatically return the vehicle to

the previously set speed.

Increasing speed while using speed control

To set a higher speed:

• Press and hold SET + until you get to the desired speed, then release.

You can also use SET + to operate the tap-up function. Press and

release SET + to increase the vehicle set speed in 1 mph (1.6 km/h)

increments.

• Use the accelerator pedal to get to the desired speed, then press and

release SET +.

Reducing speed while using speed control

To reduce a set speed:

• Press and hold SET – until you get to the desired speed, then release.

You can also use SET – to operate the tap-down function. Press and

release SET – to decrease the vehicle set speed in 1 mph (1.6 km/h)

increments.

• Press the brake pedal until the desired vehicle speed is reached, then

press SET –.

Turning off speed control

To turn off the speed control, press OFF or turn off the ignition.

Note: When you turn off the speed control or the ignition, your speed

control set speed memory is erased.

Driver Controls

2011 Taurus (500)

Owners Guide, 1st Printing

USA (fus)

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 405 406

Pas de commentaire

Ford 2011 Taurus v.1 Manuel d'utilisateur Page 89