Ford 2011 Taurus v.1 Manuel d'utilisateur télécharger pdf (Page 22)

3. Once “OIL LIFE SET TO XXX%” is displayed, release and press the

RESET button to change the Oil Life Start Value. Each release and press

will reduce the value by 10%.

UNITS

Displays the current units in English or Metric.

Press RESET to change between English and Metric.

AUTO HIGH BEAM (if equipped)

This feature automatically turns on your high beams if it is dark enough

and no other traffic is present.

Press RESET to turn the auto high beam on or off.

AUTOLAMP (SEC)

This feature keeps your headlights on for up to three minutes after the

ignition is switched off.

Press RESET to select the new Autolamp delay values of 0, 10, 20, 30,

60, 90, 120 or 180 seconds.

AUTOLOCK

This feature automatically locks all vehicle doors when the vehicle is

shifted into any gear, putting the vehicle in motion.

Press RESET to turn autolock on or off.

AUTOUNLOCK

This feature automatically unlocks all vehicle doors when the driver’s

door is opened within 10 minutes of the ignition being turned off.

Press RESET to turn autounlock on or off.

COLLISION WARN GAP (if equipped)

This allows you to adjust the sensitivity setting of the collision warning

system. See Collision Warning System in the Driving chapter for more

information.

Press RESET to change the sensitivity setting from high sensitivity <– –

– – –> to low sensitivity <–>.

COLLISION WARN CHIME (if equipped)

This feature warns the driver of a possible collision. See Collision

warning system in the Driving chapter for more information.

Press RESET to turn the warning chime on or off. The system will revert

to chime on each time the vehicle is started. The heads-up display and/or

chime will activate briefly to confirm the last setting.

Instrument Cluster

2011 Taurus (500)

Owners Guide, 1st Printing

USA (fus)

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 405 406

Pas de commentaire

Ford 2011 Taurus v.1 Manuel d'utilisateur Page 22