Ford 2011 F-550 v.1 Manuel d'utilisateur télécharger pdf (Page 117)

100

101

1. Firmly press the two outer

Car2U威 system buttons for

1–2 seconds, then release.

2. Go to the garage to locate the

garage door opener motor and its

“learn” button. You may need a

ladder to reach the unit and you

may need to remove the unit’s cover

or light lens to locate the “learn”

button. Press the “learn” button,

after which you will have

10–30 seconds to return to your

vehicle and complete the following

steps. If you cannot locate the

“learn” button, refer to the Owner’s Guide of your garage door opener or

call the toll-free Car2U威 system help line at 1-866-57Car2U

(1-866-572-2728).

3. Return to your vehicle. Press and

hold the Car2U威 system button you

would like to use to control the

garage door. You may need to hold

the button from 5–20 seconds,

during which time the selected

button indicator light will blink

slowly. Immediately (within

1 second) release the button once the garage door moves. When the

button is released, the indicator light will begin to blink rapidly until

programming is complete.

4. Press and release the button again. The garage door should move,

confirming that programming is successful. If your garage door does not

operate, repeat the previous steps in this section.

After successful programming, you will be able to operate your Car2U威

system by pressing the button you programmed to activate the opener.

The indicator light above the selected button will turn on to confirm that

the Car2U威 system is responding to the button command.

Driver Controls

117

2011 F-250/350/450/550 (f23)

Owners Guide, 1st Printing

USA (fus)

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 440 441

Commentaires sur ces manuels

Pas de commentaire

Ford 2011 F-550 v.1 Manuel d'utilisateur Page 117

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2011 F-550 v.1