Ford 2011 Expedition Manuel d'utilisateur télécharger pdf (Page 194)

100

101

The tether strap anchors in your vehicle are in the following positions

(shown from top view):

• Second row bench seat

• Second row bucket seats

Attach the tether strap only to the appropriate tether anchor as shown.

The tether strap may not work properly if attached somewhere other

than the correct tether anchor.

Once the child safety seat has been installed using either the safety belt,

the lower anchors of the LATCH system, or both, you can attach the top

tether strap.

If you install a child seat with rigid LATCH attachments, and have

attached the top tether strap to the proper top tether anchor, do not

tighten the tether strap enough to lift the child seat off the vehicle seat

cushion when the child is seated in it. Keep the tether strap just snug

without lifting the front of the child seat. Keeping the child seat just

touching the vehicle seat gives the best protection in a severe crash.

Perform the following steps to install a child safety seat with tether

anchors:

Second row seating positions

1. For center seating positions, route the child safety seat tether strap

over the back of the seat.

For outboard seating positions, route the tether strap under the head

restraint and between the head restraint posts. If the top of the safety

seat hits the head restraint, recline the seatback slightly to obtain proper

fit.

Seating and Safety Restraints

194

2011 Expedition (exd)

Owners Guide, 1st Printing

USA (fus)

1 2 ... 189 190 191 192 193 194 195 196 197 198 199 ... 394 395

Commentaires sur ces manuels

Pas de commentaire

Ford 2011 Expedition Manuel d'utilisateur Page 194

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2011 Expedition